Crystal Blank 製造流程
DIP TYPE 製造流程
SMD TYPE 製造流程
首頁
技術支援
Synthetic Quartz Crystal
Synthetic quartz crystal bars are grown under high temperature and pressure autoclave. Usually growing period is about 60 to 90days.
Orientation of Crystal bar
Orientation of quartz crystal bars are set up into AT cut or BT cut with X-ray Equipment.
Cutting
Synthetic quartz crystal bars are cut into thin crystal blanks by using highly accurate multi-blades.
Waxing
Quartz crystal wafers are stuck together with adhesive for “rounding process”.
Rounding
The blank rounding is depending on the crystal ‘s packages. It’s rounded or cut into rectangular shape.
Frequency Lapping
Frequency Lapping is to grind the crystal blank surfaces, using abrasives to a targeted thickness and frequency.
Beveling
Lower frequency blanks, e.g. center frequency under 10 MHz, crystal blanks are beveled along its edge.
Etching
The crystal blanks are etched in an acidic solution to improve the surface finish and reduce the spread in frequency of the production batch.
Blank Cleaning
After etching, crystal blanks are cleaned with water.
Blank Sorting
Crystal blanks are sorted with X-ray by measuring its angle.
關於津綻
最新消息
產品單元
技術支援
環境政策
聯絡我們
首頁
地址: 台灣省新北市中和區員山路504號3樓之5
電話: 886-(02) 8221-4498
傳真:886-2-8221-4499
COPYRIGHT
©
2007 津綻石英科技股份有限公司
E-mail:
jenjaan@jenjaan.com.tw
電話: 886-(02) 8221-4498 傳真:886-2-8221-4499 E-mail:jenjaan@jenjaan.com.tw
技術支援
